3 Easy Ways to Clean Your Bathroom Extractor Fans
Are your bathroom extractor fans looking a bit worse for wear? Don’t worry – cleaning them isn’t as hard as you might think! In this blog post, we’ll be discussing three easy ways to get your bathroom extractor fans looking as good as new. Keep reading to find out what these tips are, and why they’re so effective!
1) Take off the cover
Before beginning to clean your bathroom fans, it’s important to make sure you take off the cover. This can usually be done by unscrewing a few screws, depending on the type of fan that you have. You may need a screwdriver for this, but in some cases you may also be able to do it with your hands.
Once the cover is off, carefully place it aside and make sure that nothing falls into the fan itself. If you have an old cover, it might be worth investing in a new one to ensure that your bathroom fans are kept safe and secure. Don’t forget to keep any screws and other small parts in a safe place until you’re ready to put everything back together.
2) Clean it with a moist cloth
For best results, use a damp cloth or paper towel when cleaning a Ventilation land bathroom extractor fan. Make sure to remove any dirt and dust that has built up in the vent area. You should also wipe down the outside of the fan blades and its other components. Don’t forget to clean the edges of the grille where the air flows in and out.
It is also important to remember to keep the fan blades as free from debris as possible. For best results, it is recommended to use a vacuum cleaner attachment to help get rid of all the built-up dirt. You may also want to use a specialized product, such as a foam cleaner or a disinfectant, to help remove bacteria from the fan.
3) Wipe down the fan inside and out
Once you have taken off the cover of your extractor fan, it is time to wipe it down both inside and out. First, use a damp cloth or microfiber towel to wipe off any dirt, dust, or debris that has accumulated on the outside. Then, use a soft-bristled brush and some warm soapy water to gently scrub away any gunk or residue that may be stuck inside the fan.
After you have finished cleaning, use a dry cloth or towel to wipe away any excess water. Make sure to get into all of the small crevices and ensure that your fan is completely dry before putting the cover back on. This will help keep your bathroom free of mould and mildew, as well as ensure that your extractor fan operates at maximum efficiency.
Once you have finished wiping down the fan inside and out, use a cloth and glass cleaner to clean the cover of the fan. This will make sure that the fan looks as good as new and works properly for many years to come.